Wednesday, January 4, 2012

Sidekick Quests Commissions! The Schenk Troop!

Here is another Christmas Present commission and another group Troop Shot. Commissioned by Chris Schenk for his party (even the dead ones).

9 comments:

  1. It's great to see the post like this keep writing

    ReplyDelete
  2. Majority in the OBD scanners inside the business also present a provision to disable an illuminated verify engine light. It'll also nexiq give for actual time testing for your emissions status which is important for almost every and every automobile.

    ReplyDelete
  3. Awesome. Looking for more post soon.
    Great work you have done by sharing them to all.

    ReplyDelete
  4. I love it when things get improved, thanks for putting up a great guide. Hope it will help me out in my future projects


    ReplyDelete
  5. I have a 1998 chevy malibu 6 cyl. 3.1 engine and have a pending po118 code. I have replaced the coolant engine temperature sensor twice and have checked the wires, all seem ok. The car starts up fine however, after shutting off the car will [url=http://www.obd2s.com/vat560-battery-analyser-p585.html]vat-560[/url] not restart again for at least a half hour. The fuel injectors have been replaced and fuel pressure is good. My info says hard starting is a symptom of this.ecu reader code; ECT sensor Circuit voltage High The general diagnostic procedures that I got for this code indicate;1.) Possible poor ground connection of the sensor at the engine.2.) Possible short to ground of the power wire from the ecm to the sensor, hot w/ key-on.3.) Confirm all connections, test wires at all connections for power, resistance and continuity.

    ReplyDelete
  6. I have a 1998 chevy malibu 6 cyl. 3.1 engine and have a pending po118 code. I have replaced the coolant engine temperature sensor twice and have vat-560 battery analyser checked the wires, all seem ok. The car starts up fine however, after shutting off the car will not restart again for at least a half hour. The fuel injectors have been replaced and fuel pressure is good. My info says hard starting is a symptom of this.ecu reader code; ECT sensor Circuit voltage High The general diagnostic procedures that I got for this code indicate;1.) Possible poor ground connection of the sensor at the engine.2.) Possible short to ground of the power wire from the ecm to the sensor, hot w/ key-on.3.) Confirm all connections, test wires at all connections for power, resistance and continuity.

    ReplyDelete
  7. "Life has taught us that love does not consist in gazing at each other but in looking outward together in the same direction." cheap football jerseys

    ReplyDelete
  8. Good to see that we have experienced people like you. We too provide services related Digital Marketing.

    Website Designing Services Mumbai

    ReplyDelete